One well-known hack to pull a bit more ROI out of your campaigns, particularly mobile and pops, is to remove your tracking once you have the campaign dialled in, and just run traffic straight to the lander.

That means that you get a faster response time from your campaign, which reliably increases ROI, often by quite a lot. But on the downside, you can’t optimise very effectively if at all – you’re running blind.

What if you could get all the data you’d normally expect from tracking, keep split-testing landers, but also get the speed of just running traffic straight to the lander with no redirects or other code?

Well, you can. And this post shows you how.

What You’ll Need To Use This Technique

You know how my tutorials tend to say “don’t worry, anyone can follow this!”?

Well, this post ain’t like that. This is definitely an advanced tutorial, and I’d expect that experienced affiliates with reasonably large-scale campaigns will be the ones who will get the most out of this technique.

If you’re just starting out, I strongly recommend that you do not mess with this stuff unless you’re already extremely techie. You have bigger fish to fry and rolling your own complex non-standard tracking systems at an early stage is a really big distraction.

On the other hand, if you’re experienced and looking for an edge, and particularly if you have a profitable campaign or five that you’d like to maximise ROI on ...

This thread has 14 more replies.
WANT TO SEE THE REST?

Join STM Forum